A Guide to Using and Maintaining the Echo SRM-2620T String Trimmer

About the Echo SRM-2620T String Trimmer

The Echo SRM-2620T trimmer is a powerful string trimmer designed for professional landscapers and homeowners dealing with tough vegetation. It is a straight shaft trimmer with features that maximize the operator’s efficiency while using and maintaining the tool.

In this guide, we will explain everything you need to know about using and maintaining the Echo SRM-2620T string trimmer.

Understand the basic components of a string trimmer

Before you dive into using the Echo SRM-2620T, it’s essential that you familiarize yourself with its basic components. The main parts of the string trimmer include the motor, cutting head, shaft and controls. The motor is responsible for powering the trimmer; In this case it is a professional level 2-stroke engine.

The cutter head holds the cutting line and rotates at high speed to provide the cutting action. It is surrounded by a debris shield that prevents grass and flying weeds from hitting the operator.

The shaft transfers power from the motor to the cutting head. The operator controls the trimmer by holding onto two handles that are attached to the shaft. One of these handles has a trigger to control the engine speed and an engine shut-off switch.

Some things to keep in mind when using a string trimmer

Using a string trimmer may seem simple, but there are a few things to keep in mind to ensure smooth operation and avoid accidents.

First, always start the mower on level ground to maintain control and prevent the pruning line from hitting any obstructions. Next, maintain a steady pace as you trim, keeping the trimmer head parallel to the ground for an even cut. It is important to prune in wide strokes, moving from side to side, to avoid scraping the soil or damaging the plants. It is also good practice to trim clockwise around the perimeter of an area to prevent the cutting line from tangling or breaking.

When using the Echo SRM-2620T, always be sure to wear proper safety equipment such as safety glasses, hearing protection, and long pants. This will protect you from debris and reduce the risk of injury. Additionally, it is essential to inspect the trimmer for damage or loose parts before each use.

When trimming near buildings, vehicles or people, be sure to maintain a safe distance to avoid accidentally hitting them. Finally, take breaks when necessary and stay hydrated to avoid fatigue, as using a string trimmer can be physically demanding.

Essential Maintenance Tips for Your Echo String Trimmer

Proper maintenance is key to keeping your Echo SRM-2620T string trimmer running smoothly for a long time. Here are some essential maintenance tips to follow:

1. Cleaning: After each use, remove any grass or debris from the trimmer head, shaft, and air filter. Use a brush or compressed air to clean hard-to-reach areas. This will prevent clogs and improve the performance of the trimmer.
2. Checking the spark plug: Periodically inspect the spark plug for signs of wear or damage. If the electrode is worn or the insulator is cracked, replace the spark plug to ensure easy starting and efficient combustion.
3. Cutting line inspection and loading: The SRM-2620T comes with a Speed-Feed 400 trimmer head. Trimmer line is wound on a spool inside the head and then ejected during trimming by hitting the rotating head against the ground. Check the cutting line regularly to ensure that it exits normally from both sides of the head. Also check the wear indicators on the outside of the head. If they are worn, replace the head cover or the entire head. Always use the recommended line diameter for your trimmer to avoid damage to the cutting head.

Using the Right Herbicide Fuel for Your String Trimmer

Using the correct fuel is crucial to maintaining the life of your trimmer. The SRM-2620T has a 2-stroke engine, which requires a mixture of gasoline and oil to be used as fuel.

To get the correct mixture, start with new gasoline that has been stored for no more than 30 days. The gas must be medium grade (89 octane) or higher and may contain up to 10% ethanol. Fill a safe fuel container with half the amount of fuel you want to finish.

Next, select a high-quality 2-stroke engine oil. Two-stroke oils are specially formulated to mix with gasoline to provide proper engine lubrication. The oil you use in Echo engines must comply with ISO-L-EGD (ISO/CD 13738) and JASO FD standards.

Measure the correct amount of oil for the amount of fuel you want to mix. For Echo engines, use a 50:1 gasoline to oil ratio. That’s 50 parts gasoline to 1 part oil, or 2.6 fluid ounces of oil to 1 gallon of gasoline.

After adding the oil to the gas, close the container and then shake it well to mix the oil and gasoline. Then add the second half of the gasoline to the container, then close it and shake it again. This procedure creates a well-mixed 2-stroke fuel for your Echo trimmer.

However, keep in mind that even properly mixed fuel will separate over time. Shake the fuel container before each use.

As an alternative to mixing the fuel yourself, you can purchase Echo Red Armor Fuel. This high-octane pre-blended 2-stroke fuel is specifically formulated to clean, protect and improve the performance of Echo two-stroke engines.

Solving common problems with your Echo SRM-2620T string trimmer

Even with proper maintenance, you may encounter some problems with your Echo SRM-2620T string trimmer. Below are some common problems and their possible solutions:

1. The motor does not start: Be sure to follow the correct procedure for starting the engine. This includes moving the stop switch away from the “stop” position, moving the choke lever to the “start” position, pumping the primer bulb 4 or 5 times, and then sharply pulling the starter cord while holding the choke. throttle trigger in the “wide open” position. Check the spark plug for signs of damage and replace it if necessary. Make sure the fuel tank is filled with fresh gasoline and the correct ratio of oil and gas. If the problem persists, contact a professional for further help.
2. Poor cutting performance: Inspect the cutting line to make sure you have approximately 5 inches of line on both sides of the cutting head. Clean the cutter head and remove any debris that may be obstructing the correct exit of the line.
3. Excessive vibration: Check for loose or damaged parts such as the cutting head or motor housing. Tighten any loose screws or bolts and replace damaged components. Excessive vibration may indicate an underlying problem that may require professional attention.

Frequently asked questions about string trimmer use and maintenance

1. How often should I load cutting line into the cutting head? As a general rule, you only need to recharge the cutting line when the line wound inside the cutting head runs out. Simply keep your eye on the cutting head while you work. If the line no longer advances when you hit the cutting head against the ground, you may need to load more line.
2. Can I use regular motor oil instead of two-stroke oil in my gas trimmer? No, regular motor oil is not suitable for two-stroke engines. It does not provide the necessary lubrication and can cause engine damage. Always use a high quality two-stroke oil recommended by the manufacturer.
3. What is the lifespan of a string trimmer? The lifespan of a string trimmer depends on several factors, including maintenance, frequency of use, and the quality of the trimmer. With proper care, an Echo SRM-2620T string trimmer can last for many years.

Expert Tips for Getting the Best Results with Your Echo Trimmer

To get the most out of your Echo SRM-2620T string trimmer, consider the following expert tips:

1. Trim in the morning or at night: Avoid trimming during the hottest hours of the day to avoid heat stress on the trimmer and yourself. Trimming in the morning or evening when temperatures are colder will result in better performance.
2. Use a quality cutting line: Echo offers a variety of cutting line types. There is the popular Cross-Fire line, which is designed for maximum cutting in thick grass or brush; the Black Diamond line, which provides the cleanest cut with its very sharp edges; Silentwist line, which offers a quieter cut; and the standard round thread, which is a good general-purpose cutting thread.
3. Adjust the angle of the cutter head: Experiment with different angles to find the most comfortable and effective position for trimming. You will find that different angles provide different results depending on the type of edge you are trimming and the type of vegetation you are cutting.

Conclusion: The benefits of having an Echo SRM-2620T string trimmer in good condition

Owning a well-maintained Echo SRM-2620T string trimmer offers numerous benefits, including optimal performance, long life, and cost savings. By following proper usage techniques and implementing regular maintenance routines, you can ensure your trimmer is working at its best. Remember to choose the right herbicide fuel, keep an eye out for common problems, and seek professional assistance when necessary. With proper care, your Echo trimmer will remain a reliable tool for all your trimming needs.

Buy Echo Trimmer Parts at parts.shankslawn.com